• Two-File Sequence: TS1 (#25/.04) and TS2 (#25/.06) files streamline root canal shaping with continuous rotation, reducing procedural steps
• T.Wire Heat Treatment: Enhances flexibility and 40% greater cyclic fatigue resistance compared to non-heat-treated files.
• Anti-Breakage Control: The Flutes unwind before breakage indicating discarding of the files.
• Asymmetrical Triple-Helix Cross-Section: Two cutting edges for efficient debris removal. Secondary edge reduces stress on canal walls, respecting original anatomy.
• Optimized Sizes/Tapers: Smaller dimensions (e.g., .04/.06 tapers) minimize tooth structure removal.
• Debris Management: Secondary edge enhances debris elimination during circumferential brushing.
• Safety: Non-cutting tip and reduced taper lower risks of canal transportation and apical extrusion.
• Clinical Efficiency: Simplified protocol with intuitive brushing motions for faster, safer preparation

• File Sequence: Two shaping files in continuous rotation: TS1 and TS2
• Heat Treatment: T.Wire technology
• Cross-Section: Asymmetrical triple-helix (two main cutting edges, one secondary edge)
• Lengths Available: 21 mm, 25 mm
• Recommended Speed: 400 rpm
• Recommended Torque: TS1: Max 2 N·cm , TS2: Max 2.5 N·cm

• Establish Glide Path
  Use One Flare for widening Canal orifice followed by One G to create a reproducible glide path to working length.

•  Irrigation
   Irrigate the canal thoroughly before and during instrumentation to aid debris removal and prevent blockage.

• Select File Sequence
   The 2Shape system uses two heat-treated NiTi rotary files in sequence:
   TS1 (25/.04 taper)
   TS2 (25/.06 taper)
• Set the Motor
   Use a rotary endodontic motor set to continuous rotation at 400 rpm and a torque of 2 N·cm
• Shaping Procedure
•  Insert TS1 into the canal, using gentle in-and-out brushing motions, progressing to working length.     
• Remove the file, clean the flutes, irrigate, and recapitulate with a  small hand file to maintain patency
• Repeat the process with TS2 to complete canal shaping.
•  In certain cases F35 ( 35/.04 Taper) & F40 (40/.04 Taper) can be used for wider canals as and when required.

• Final Irrigation and Drying
   After shaping, irrigate thoroughly. Dry the canal with paper points matched to the file size.
• Obturation
   Use matching gutta-percha points for obturation to ensure a precise fit

Pack of 6 files

• Country of Origin: France
• Manufacturer: Micromega